Domain Specific Settings

Note: Most 'matching' settings take wild card lists as parameters, for example "fred*" will match "freddy" and "Fred@bob". And "1.2.*,2.3.*" will match 1.2.4.4 and 2.3.99.100. 

address - Virtual Domain IP

This is not a setting itself but part of the vdomain setting. The vdomain setting is like a section heading, it divides the configuration file into sections, the global section comes first followed by any number of domain sections or vdomain blocks.

The address part of the vdomain setting is the IP number of this virtual domain. You will also need to configure your operating system and network to respond to this IP address. Doing this for specific operating systems is described on this page in more detail. 

domain_name - Domain MX Record name

This is not a setting itself, but part of the vdomain setting. The vdomain setting is like a section heading it divides the configuration file into sections. The global section comes first followed by any number of domain sections or vdomain blocks.

This is the name of this virtual domain of the mail server. It is a domain name it accepts mail for. The mail server supports any number of virtual domains. See this page for a discussion on different types of virtual domains. 

eg: if you are wanting to send mail to user@mydomain.com this setting should be "mydomain.com". But if you are wanting to send mail to user@mail.mydomain.com this setting should be "mail.mydomain.com"

This setting is seperate from your actual hostname of the system running your email server. These will often be the same but if they are not it is important that the url_host setting setting is set to correctly resolve your server. eg: You could have domain_name = mydomain.com and url_host = mail.mydomain.com if your mail server is separate from your web server and your main company web server is already hosted on mydomain.com.

abook - Define surgeweb shared address books for this domain

The read/write fields should be a list of valid usergroups or * for all users

Syntax: abook name=string read=string write=string type=string

access_group_default - Default group to place users in

Specifies the default g_access_group to place users in this domain into.

Syntax: access_group_default string

admin_access_default - Default features granted to domain admins in this domain

This setting allows you to specify default access to certain SurgeMail features. It is specified in the same maner as the g_admin_access settings 'access' parameter. eg:

admin_access_default "all,!users,!reports"

Syntax: admin_access_default string

alias_file - Alias file

In addition each domain has it's own 'alias' file (domain.name/alias.dat). You can create alias files using the same syntax as used in UNIX systems /etc/aliases. The format is:

username:   destination
bob:            fred@domain.com
joe:             joesmith

This file only exists for backward compatibility.

Syntax: alias_file string

alias_max - Maximum number of aliases for this domain

Limits the ..total number of aliases allowed in this domain to the value specified.

Syntax: alias_max int

assume_created_epoch - If user has no 'created' field assume they were created an arbitrarily large time in the past

This setting effect the g_disable_smtp_after and g_delete_user_after settings which, by default, ignore users who have not logged in and have no created field.

Syntax: assume_created_epoch bool

blogs_max_per_user - Number of blogs each account can create

This setting has no further documentation currently available

Syntax: blogs_max_per_user int

Example: blogs_max_per_user 10

See also: g_access_group, g_blogs_max_per_user, g_user_blogs

broad_sync - Broadsoft Sync Enable

Customer specific feature

Syntax: broad_sync bool

centipaid - see centipaid.htm

Specifies accounts that can charge for incoming email.

Syntax: centipaid match=string acct=string pass=string https=string lang=string amount=int enabled=bool friends=bool smite=int

class - Define class of user for following commands to apply to

hidden

Syntax: class type=string from=string users=string groups=string name=string

comment - Management notes and comments about the domain

This is a dummy setting that lets you store information in the ini file that will survive setting changes from the web admin tool.

Syntax: comment date=string name=string comment=string

create_block - Block new users from this IP

Stops users from specific IP addresses from registering in this domain (assuming that you have allowed users to register themselves). Use this to stop known spammers from re-registering on your system. 

Syntax: create_block string

create_cleanup - Cleanup existing data before adding a user

This causes a delete to be actioned for a user before/as they are created. This ensures the new user does not end up with any files, on any mailing lists, with any aliases etc from a previous user of the same name/address. If you delete users from the authent database directly i.e. not using the surgemail web admin or calling 'tellmail delete_user' then this setting will cleanup the users files when their address is re-used.

Syntax: create_cleanup bool

create_delete_days - Number of days a disabled new account remains before deletion

Accounts disabled with create_disable_days remain until the specified number of days at which point they are deleted.

Syntax: create_delete_days int

See also: create_disable_days

create_disable_days - Number of days new accounts remain active for

New accounts when created are set to expire after the specified number of days. When this occurs they can no longer login or recieve email.

Syntax: create_disable_days int

See also: create_delete_days

create_image - Use verification image on signups

This adds a verification image to the signup process. The user will be required to correctly enter the value shown in the image to signup

Syntax: create_image bool

create_linkto - Link to redirect to after successful live account creation

This is the web url/link that the user creation process links to once it has created a new and active email account (active means it is ready for use, i.e. not disabled, verified my manager etc)

Syntax: create_linkto string

create_max - Maximum signups from one IP in a day

This setting stops spammers registering hundreds of accounts on your system before sending out a lot of spam. A setting of 2-3 is probably a good idea. 

Syntax: create_max int

create_repass - User enters password twice on creation

If true this will show a "Password Again" input in addition to the "Password" input on the user signup page. The user is required to type the password in twice and the passwords are compared to ensure they are identical.

Syntax: create_repass bool

create_reqd - Required fields for new users

A comma separated list of field names. Allowable field names are the "field" value(s) of the g_authent_info setting.

For example, if your setting is:
       name,phone

then when a new user is created they will be forced to fill in the name and phone fields in the registration form.

NOTE: A g_authent_info setting is required to make the field appear on the signup page, eg.

g_authent_info name="Phone" field="phone" access="user" default=""

the above setting causes a field for phone to appear on the signup page and in the user details page.

Syntax: create_reqd string

create_subdomain - Allows users to create an account that belongs to it's own unique domain.

If true this allows users to create accounts with a unique subdomain i.e. firstname@lastname.domain. SurgeMail uses the domuser system to handle sub-doamin users. Wildcard MX records are required to ensure delivery to subdomain users.

Syntax: create_subdomain bool

create_tpl_dir - Relative path to user create pages

The relative path from the web directory to the user creation and user self management pages, these pages are typically called na_*.htm and stored in the /web directory. If you want a different look and feel for a domain simply set this and copy the pages to a directory in /web then modify them.

For example, if your setting is:
       otherdomain/

Then you would:
       cd /surgemail/web
       mkdir otherdomain
       copy na_*.htm otherdomain
       CD otherdomain
       notepad na_login.htm

Syntax: create_tpl_dir string

create_user - Method for adding new users

Can be one of:

Value Description
open Anyone can create an account immediately providing name and password. Be sure to set create_max "3" to prevent spammers creating dozens of accounts.
email Anyone can create an account providing existing email address.
manager Manager approves account, user provides existing email address.
manager_new Manager activates account, user proves name and password.
disabled Users cannot signup, accounts are created by the Web Admin.

In 'open' mode users account are created instantly. In 'email' mode they recieve an email and use a link to create their account. In 'manager' mode the manager recieves an email and via a link sends the user an email which they use to create their account. In 'manager_new' mode the account is created disable and the manager receives an email with a link to activate the account.

Syntax: create_user string

delete_user_after - Number of days an account can remain unread before it is deleted

DO NOT USE THIS SETTING IN A MIRROR/CLUSTER SETUP

Number of days an account can remain unread before it is deleted. This setting cannot be used on an authent_domain FALSE domain unless it has a prefix setting.

Syntax: delete_user_after int

disable_smtp_after - Number of days an account can remain unread before delivery is disabled

Specifies a number of days an account can remain 'unread' before it stops recieving new emails. This is intended to stop mail piling up for abandoned email accounts.

Syntax: disable_smtp_after int

disable_surgeplus - Disable SurgePlus Calendar and File Sharing client

Disable users from logging in using the SurgePlus Calendar and File Sharing client. See SurgePlus

Syntax: disable_surgeplus bool

See also: g_disable_surgeplus

dmail_bin_path - Path for DMail bin files to automatically convert

Path for DMail style bin files to automatically convert. This allows you to import delivered but unpopped mail from DMail bin and mailbox files. While this is set a check is done whether this import needs to be done each time a user logs on. Any mail is converted on the fly and added to the users SurgeMail inbox.

Syntax: dmail_bin_path string

dmail_deliver - Deliver messages into dmail drop directories (not supported)

This setting has no further documentation currently available

Syntax: dmail_deliver bool

dmail_drop_path - Path for drop files to automatically convert

Path for DMail / sendmail style drop files to automatically convert. This allows you to import delivered but unpopped mail from standard drop files. While this is set a check is done whether a drop file needs to be imported each time a user logs on. Any mail is converted on the fly and added to the users SurgeMail inbox.

Syntax: dmail_drop_path string

dmail_drop_prefix - Whether prefix is used on dmail drop files

Prefix on dmail drop files for dmail_drop_path conversion.

Syntax: dmail_drop_prefix bool

dmail_hash - Hashing scheme used by dmail_drop_path and dmail_bin_path

DMail style hashing scheme used by dmail_drop_path and dmail_bin_path.

Syntax: dmail_hash string

dmail_skip_imap - Skip conversion of old imap *.mbx folders

This setting is usually not needed

Syntax: dmail_skip_imap bool

encrypt_ifnew - Allow surgeweb ifnew options

Not for general use

Syntax: encrypt_ifnew bool

encrypt_limit - Max encrypted msgs per user per day

Per user limit per day, (used to be per hour)

Syntax: encrypt_limit int

encrypt_limitsz - Max size of encrypted msgs per user per day

Per user dayly limit, e.g. 10mb

Syntax: encrypt_limitsz int

encrypt_noconfirm - Disable confirmation for encrypted messages

Disables the automatic confirm reading message

Syntax: encrypt_noconfirm bool

encrypt_rule - Matches will be encrypted when sent

If this rule matches then the message will be encrypted before it is sent to the user. method=server or inline, we recommend 'server' mode as it's much simpler.

Syntax: encrypt_rule header=string contains=string from=string to=string noconfirm=bool method=string

encrypt_smart - Encrypt smart features enabled for this domain

Not for general use

Syntax: encrypt_smart bool

encrypt_subject - Subject when encrypted message sent - default is original subject

Not yet implemented

Syntax: encrypt_subject string

encrypt_surgeweb_hide - Hide lock icon on surgeweb

This setting has no further documentation currently available

Syntax: encrypt_surgeweb_hide bool

encrypt_token - This setting is not used, instead use smart and ifnew settings

This feature is not controlled by this setting, it's part of the smart features and controlled by the surgeweb options if enabled, instead set encrypt_ifnew and encrypt_smart

Syntax: encrypt_token bool

enotify_from - From address to use in email notification messages

Users can set an email address to send a notify to when they get an email. This setting sets the 'from' header for such messages.

Syntax: enotify_from string

See also: g_enotify_from

expire_age - Expire undeleted mail older than specified age left in INBOX

Use this to trim messages that are left in the INBOX, this means messages that are unread and messages which are read but not moved to another folder. The deleted messages are replaced with a single message explaining which items have been deleted (with from, subject and date of each message deleted). You should define both age and size to enable expiration. 

Currently expire ONLY affects 'newmail' ie: mail that is waiting to be read not mail stored in IMAP folders.

Syntax: expire_age int

expire_rule - Expire rules for specific folders

These rules let you specify and expire rule for any folder. The folder match is not case sensitive

e.g. to delete all spam message over 30 days old and larger than 3k and to empty the trash can each day.

expire_rule folder="Spam" age="30" size="3k"
expire_rule folder="Trash" age="1"

You can use wild cards, e.g. Delete all messages over 90 days old larger than 10k unless in the new or archive* folders.

expire_rule folder="*,!new,!archive*" age="90" size="10k" 

Syntax: expire_rule folder=string age=int size=int alert=bool

expire_size - Expire undeleted mail larger than specified size (units=bytes)

Use this to trim messages that are not read by users. The deleted messages are replaced with a single message explaining which items have been deleted (with from, subject and date of each message deleted so that anything really important can be recovered). You should define both age and size to enable expiration.

Syntax: expire_size int

fallback - Fallback Email address or account

Specifies a default account to deliver Email to. This is sent to a non existent account. If not defined the Email will be bounced. Setting fallback to "/dev/null" will drop messages (both UNIX and Windows).

Syntax: fallback string

fallback_always - Also relay to old system even if user does exist - not recommended

This setting can be used when bringing up a new system if you want to be able to backout. It is not recommended

Syntax: fallback_always bool

fallback_check - Fallback check

Check if user exists on fallback relay host before accepting it.

Syntax: fallback_check bool

fallback_force - Use fallback even if user does exist as migration not started yet

Use fallback address even if user does exist. Useful before migration occurs.

Syntax: fallback_force bool

fallback_mx - Use mx lookup to find ip address for fallback_relay setting

This setting has no further documentation currently available

Syntax: fallback_mx bool

fallback_relay - Fallback host to relay non existent accounts to

Specifies a default host to send messages to that are not found in the local user database. This allows you to transition between two mail systems, as new accounts are created the emails will be delivered to SurgeMail, and ones that don't exist will be sent on to the old system automatically. There are several options to make this work using servers that only accept mail if they can do a reverse lookup.

Syntax: fallback_relay string

fallback_users - Path to file listing all users to user fallback_relay for

Useful to remove load from backend server as it doesn't have to be checked for non existent users, the file can contain user@domain or just usernames

Syntax: fallback_users string

footer_file - Footer file for plain text messages

Footer file for all plain text messages 'from' this domain based on from address.

Syntax: footer_file string

footer_html - Text footer file

Footer file for all HTML messages 'from' this domain based on from address.

Syntax: footer_html string

forward_illegal - Prevents users setting forward rules to certain addresses

Syntax: g_forward_illegal to="address" apply="user type "

This setting allows you to specify some addresses as being illegal for certain users. This stops users setting up forwarding rules to these addresses. They can still send mail to these addresses manually with their email client. These rules _ONLY_ apply to non local domains.

Some examples:

If you want to stop your users setting up forward rules that redirect to aol.com.
g_forward_illegal to="*@aol.com" apply="user"

If you want to stop your users setting a forward to all domains except aol.com
g_forward_illegal to="*,!*@aol.com" apply="user"

Stop domain admins sending to aol.com
g_forward_illegal to="*@aol.com" apply="domadmin"

Stop admins sending to netwinsite.com
g_forward_illegal to="*@netwinsite.com" apply="admin"

Syntax: forward_illegal to=string apply=string

friends_at_rcpt - Whether to check users friends list at rcpt stage

This setting is automatically added/removed by the web admin when domain level friends defaults are configured. It allows us to check friends at rcpt stage without paying a disk access cost for non-friends users.

Syntax: friends_at_rcpt bool

friends_pending_name - The imap name of the friends_pending folder default is 'Friends Pending'

This shouldn't be changed unless this feature has not been used before as it will confuse your users as they will have the old imap folder too. Ensure you have enabled this feature with g_imap_friends setting

Syntax: friends_pending_name string

See also: friends_at_rcpt, friends_url, g_friends_only, g_friends_bounce_rej, g_friends_bounce_friend, g_friends_cleanup, g_friends_daemon_ok, g_friends_name, g_friends_pending_name, g_friends_silent, g_friends_silent_level, g_friends_ignore, g_friends_skip_ip, g_friends_confirm_subject, g_friends_default_mode, g_friends_default_autoadd, g_friends_msg, g_friends_msg_link, g_friends_latest_headers, g_friends_lang_auto, g_friends_pending_keep, g_friends_pending_max, g_friends_pending_vanish, g_friends_at_rcpt, g_friends_allow_spf, g_friends_spf_fail_bounce, g_friends_check_spf, g_friends_safer, g_friends_always, g_friends_add_trusted, g_friends_global_add, g_friends_global_exclude, g_friends_confirm_debug, g_friends_rotate, g_friends_long, g_friends_ignore_trusted, g_friends_url, g_friends_autodom, g_friends_byemail, g_friends_bounce_second, g_friends_old_status_email, g_friends_obey_spf, g_friends_local_match, g_friends_spam_score, g_friends_status_sort, g_friends_release_wash, g_friends_warnonce, g_friends_debug1, g_imap_friends, g_quota_friends, g_spam_probe_friends, g_user_friends_domain_log_disable, g_user_friends_log_disable

friends_url - Specify full url for friends release http://domain.name:port domain specific setting

Normally the default will work.

Syntax: friends_url string

from_exact - Check from matches authenticated user

Checks that the from header perfectly matches the authenticated user

Syntax: from_exact bool

gateway_to - Send all email to another server

Useful when migrating if you want email to go to another server while users can still login and read existing email on this server, the messages will be sent even if the user does not exist locally

Syntax: gateway_to string

header_add - Add header to posts 'from' this domain

Adds headers, the headers are added based on the 'from' domain of the message.

Syntax: header_add string

See also: user_status_send, user_send_max, send_helo, g_encrypt_reset_sender, g_from_rewrite_sender, g_footer_send, g_footer_sendonly, g_responder_sender, g_send_first_retry, g_send_helo, g_send_helo_from, g_send_helo_in, g_send_backoff, g_send_lines, g_send_nopoll, g_send_lowpriority, g_send_max, g_send_max_perchan, g_send_max_perdom, g_send_max_rcpt, g_send_nolimit, g_send_no_domain, g_send_onpopfetch, g_send_retry_552, g_send_rewrite, g_send_noskipslow, g_send_speed, g_send_conspeed, g_send_delay, g_send_timeout, g_send_tolimit, g_send_open_timeout, g_send_body_noretry, g_send_body_end_retry, g_send_body_once, g_send_strip, g_send_store_disable, g_user_status_send, g_user_send_max, g_user_send_rule, g_user_send_warning, g_user_send_ip, g_user_send_white

host_alias - Alias name(s) for this virtual domain

When a user sends to 'bob@xx.your.domain.name' or 'bob@yy.your.domain.name' you need to have the alias host names 'xx.your.domain.name' etc, defined or the mail server will reject the message. Wild card's can be used for this setting. Example: host_alias "*.your.domain.name"  This can also be used to accept mail directly to the servers ip address eg 'bob@123.4.5.'

Syntax: host_alias string

imap_max_sync - Limit remote imap sync to this many items (not recommended)

This setting has no further documentation currently available

Syntax: imap_max_sync int

imap_public - Share IMAP folders between users

This setting allows folders to be shared between users. See g_imap_acl, Requires surgemail 3.9d or later!. e.g. imap_public name="INBOX" alias="lances_inbox" user="lance" users="*"

Syntax: imap_public name=string alias=string user=string subfolder=bool users=string group=string readonly=bool

Example: Share IMAP folders between users

See also: dmail_skip_imap, imap_public_show, imap_max_sync, old_imaphost, old_imaphost_always, old_imaphost_createuser_disable, old_imaphost_nodomain, old_imaphost_nodelete, old_imaphost_prefix, old_imaphost_file, old_imaphost_user, old_imaphost_pass, old_imaphost_lowercase, old_imaphost_skip, g_autologin_imap_disable, g_debug_imap, g_fix_imap_lf, g_imap_acl, g_imap_auto_create, g_imap_auto_subscribe, g_imap_blacklist, g_imap_cram_enable, g_imap_capa, g_imap_capa_strip, g_imap_debug, g_imap_expunge_close, g_imap_folder, g_imap_idle_free, g_imap_inactive_free, g_imap_log_protocol, g_imap_log_main, g_imap_log_size, g_imap_log_flush, g_imap_log_copy, g_imap_log_header, g_imap_log_body, g_imap_move, g_imap_maxdup, g_imap_port, g_imap_delay, g_imap_secure_port, g_imap_search_noattach, g_imap_search_index, g_imap_search_body, g_imap_search_text, g_imap_spam_train, g_imap_status_cache, g_imap_status_stored, g_imap_no_internal_date, g_imap_throttle, g_imap_throttle_speed, g_imap_throttle_limit, g_imap_throttle_exclude, g_imap_timezone, g_imap_timeout, g_imap_trash_nocopy, g_imap_uidl_nofix, g_imap_unsub_auto, g_imap_size_fetch, g_imap_idle_nsf, g_imap_testing, g_imap_old, g_imap_old_ip, g_imap_pop_burst, g_imap_friends, g_imap_user_flags, g_imap_max_messages, g_imap_sync_nomax, g_imap_sync_all, g_safe_imap, g_old_imap_headbody, g_ssl_allow_imap, g_ssl_require_imap, g_stack_imap

imap_public_show - Auto subscribe public folders

This setting has no further documentation currently available

Syntax: imap_public_show bool

inbox_archive - Archive old messages to Archives/yyyy/INBOX folder, age in days

This setting has no further documentation currently available

Syntax: inbox_archive int

language_default - Default language for user web interface

If the user has not yet selected a language then this language is used as a default. If the language specified here does not exist in the language files, or nothing is specified here then English is used as the default language.

Syntax: language_default string

late_forward - Apply domain users forwarding rules after friends, spam, and filtering

By default users forwarding rules are applied before friends, spam and user filter rules. By default users can tick and option on their forwarding page to perform 'late' forwarding, that is forwarding that occurs after friends, spam and filtering. This option overrides the user option and causes domain users forwarding rules to be applied after friends, spam and filtering.

Syntax: late_forward bool

ldap_anydomain - Lets users search other than their own domain in ldap

If ldap is enabled for the system (g_ldap_port) then this lets users of this domain lookup users in any domain not just this domain.

Syntax: ldap_anydomain bool

See also: ldap_disable, g_ldap_port, g_ldap_forward, g_ldap_outlook_browse_max

ldap_disable - Stops ldap logins by users of this domain

If ldap is enabled for this system, then this setting disables it for this specific domain

Syntax: ldap_disable bool

See also: ldap_anydomain, g_ldap_port, g_ldap_forward, g_ldap_outlook_browse_max

legal_archive_admin - Enable archive searching for domain admins

This setting has no further documentation currently available

Syntax: legal_archive_admin bool

legal_archive_disable - Disable legal archive for this domain (experimental)

This setting has no further documentation currently available

Syntax: legal_archive_disable bool

legal_archive_hide - Hide legal archive for this domain (experimental)

This setting has no further documentation currently available

Syntax: legal_archive_hide bool

legal_archive_keep - Days to keep legal archive, units=days unless you specify years or months

default is g_legal_archive_keep

Syntax: legal_archive_keep int

list_disable - Disables creation of mailing lists

When set to "TRUE" this disables mailing list creation for this domain.

Syntax: list_disable bool

list_max - Maximum number of mailing lists for this domain

Set this to the maximum number of mailing lists to allow for this domain.

Syntax: list_max int

list_max_users - Maximum number of users allowed in all lists in this domain

This is a quota of users/members for all lists in this domain. The maximum number of members in each list in this domain must total to less or equal to this setting.

eg:
list_max_users "100"
list_max "2"

In this scenario, 100 users could be used in 2 lists. So one list might have 80 users the other 20, but the combined total must be less than or equal to 100 users.

Syntax: list_max_users int

loginfails - Disconnect after failed logins

Disconnect user after this many bad password guesses.

Syntax: loginfails int

lookup_relay_on_from - Lookup from addresses for relay allowed

Looks up local authenticated smtp from addresses to check for relay is allowed flag (relay="true").

Syntax: lookup_relay_on_from bool

mailbox_path - Path to mailbox maildir (inbox) files

Specifies the root directory for users in this domain for their incoming mail messages and mail folders (for IMAP), maildir structure is used and hashing will also be applied so if you specify d:\spool, then 'bob's Email will appear in d:\spool\xx\yy\bob\mdir... where 'xx' and 'yy' are hashing numbers for that user. (Hashing is required to keep directory performance at a high level when you have millions of users). 

Syntax: mailbox_path string

manager_email - Managers Email

This is the manager's Email address for this domain.  When users register themselves, if you have set create_user to the 'manager' method, an Email will be sent to this Email address to await confirmation of the user creation.

Syntax: manager_email string

manager_username - Domain managers username (for web based domain administration)

Specifies the local users which have manager rights for this domain. These users can login to the user self management interface and will recieve special domain manager options. If you specify an account without the @domain part i.e. 'admin' it assumes admin@.

Syntax: manager_username string

msg_max_in - Max size of incoming messages for this domain.

Sets the size of messages for this domain, note that this may affect the ehlo response but only for 'address' based virtual domains, so you must ensure your g_msg_max setting is sufficiently large. Also since this figure may be shown before the msg_max_out value is determined you must also make it larger than the msg_max_out value. We don't recommend using this setting unless it is totally necessary. It is better to choose a g_msg_max setting that all domains can live with.

Syntax: msg_max_in int

msg_max_out - Max size of outgoing messages for smtp authenticated users

Sets the size of messages for this domain, as the email client may have already seen the value of g_msg_max or msg_max_in it may not help setting this value 'larger' than those other values. We do not recommend using this setting, it is best to choose a g_msg_max value that all domains can live with.

Syntax: msg_max_out int

old_imaphost - Intercept mode migration for IMAP folders servers

The old_pophost settings will create a local account and download many mail in your inbox. However in the event that your old server also was an IMAP server you will be able to migrate your stored message folders using the old_imaphost setting. This download is only ever attempted once and does so asynchronously. A 300MB mailbox with 15000 messages will would be expected to take around 20 minutes. While IMAP folders are bing downloaded the mailbox can already be used. Note: the mail on the old server gets deleted.

Upon IMAP login an old_pophost check is also performed if defined. This is specifically so that WebMail accessing SurgeMail using IMAP (recommended configuration) will allow the retrieval of mail from old POP servers.

Syntax: old_imaphost string

old_imaphost_always - Always attempt to suck mail on each IMAP login (slow)

This setting will force the download of mail and folders from the old server upon each IMAP login. Note: that this should only be used if specifically required as this will happen for example each time that a WebMail change made.

Note: This will obviously stop retrieving mail if the user changes their password in SurgeMail but not on the old server.

Syntax: old_imaphost_always bool

old_imaphost_createuser_disable - Disable user creation in database on login

If you have already got your users in your authentication database and do not wish to add new users logging in using intercept mode this setting can be used to prevent user creation upon first login to SurgeMail using POP.

Syntax: old_imaphost_createuser_disable bool

old_imaphost_file - Migration based on file

Specialist setting for one specific system, not for general use.

Syntax: old_imaphost_file string

old_imaphost_lowercase - Lowercase all migrated folders

Lowercase all migrated folders.

Syntax: old_imaphost_lowercase bool

old_imaphost_nodelete - Leave mail on the old server

This setting will leave mail on the old server just in case there are problems with the migration. Note: the use of this setting will disable the use of old_imaphost_always.

Syntax: old_imaphost_nodelete bool

old_imaphost_nodomain - Strip domain when logging in to old_imaphost

This can be used if you are migrating from a server that uses username only (without domain) logins.

Syntax: old_imaphost_nodomain bool

old_imaphost_file, old_imaphost_user, old_imaphost_pass - Migration based on file settings

Specialist fileIMAP migration based on file settings.

Syntax: old_imaphost_pass string

old_imaphost_prefix - Mail prefix for old imap server when using old_imaphost

IMAP prefix for old imap server. eg. mail/.

Syntax: old_imaphost_prefix string

old_imaphost_skip - Skip folders

Comma seperate wild card list of migrate folders to skip past.

Syntax: old_imaphost_skip string

old_imaphost_user - Migration based on file - user field

Specialist setting for one specific system, not for general use.

Syntax: old_imaphost_user string

old_inbox_both - Use pop & imap to migrate the inbox

This may create duplicates, you should only use it when the old server keeps the imap and pop inboxes as sepereate entities.

Syntax: old_inbox_both bool

old_pophost - Old pop host for pop intercept mode based migration

Specifies an old POP host that can be used when migrating users from an old mailserver to a new mailserver. This will create a local accounts with a identical username/passwords and retrieve all mail from the old server for the old account when the user logs into SurgeMail for the first time and they are not yet in the SurgeMail user database. Mail on the old server is deleted.

The use of old_pophost adds an additional check (based on partial rcpt delivery - see g_badfrom_check) to user account self creation to prevent user creating accounts that clash with existing accounts that have not been popped on SurgeMail. This means that the old server should only accept delivery to actual accounts or all user account self creation will be disabled.

Syntax: old_pophost string

old_pophost_always - Always attempt to suck mail on each login

Suck mail from old_pophost on each login (account information is not set at each login). This allows the user to be using the new mail server and still retrieve mail from the old server if mail is delivered there. This is useful in two cases:
1) if the user is already using SurgeMail but some mail is still delivered to the old server due to delays in MX record propagation.
2) To allow incremental migration. Some users can be using the SurgeMail and some users can be using the old server. Users still on the old server sending mail to users on SurgeMail would deliver to the old server. When a user on SurgeMail logs into SurgeMail any such mail is retrieved from the old server.

Note: This will obviously stop retrieving mail if the user changes their password in SurgeMail but not on the old server.

Syntax: old_pophost_always bool

old_pophost_bind - Bind outgoing connection during pop migration

This binds to the specified local port during a migration

Syntax: old_pophost_bind string

old_pophost_createuser_disable - Disable user creation in database on login

If you have already got your user in your authentication database and do not wish to setup this setting can be used to prevent user creation upon first login to SurgeMail using POP.

Syntax: old_pophost_createuser_disable bool

old_pophost_inbox - Use pop to migrate the inbox and maintain uidls

This skips the imap migration of the inbox, IF the user logs in via POP, and instead uses pop to migrate the inbox. This means it can maintain the uidl's correctly

Syntax: old_pophost_inbox bool

old_pophost_nodelete - Leave mail on the old server

This setting will leave mail on the old server just in case there are problems with the migration. Note: the use of this setting will disable the use of old_pophost_always.

Syntax: old_pophost_nodelete bool

old_pophost_nodomain - Strip domain when logging in to old_pophost

This can be used if you are migrating from a server that uses username only (without domain) logins.

Syntax: old_pophost_nodomain bool

old_pophost_nofetch - Disable fetching messages from pop host

Useful if you want to migrate the account user/password, but not the messages

Syntax: old_pophost_nofetch bool

old_pophost_sep - Login separator

Seperater, default is '@'. e.g. some systems use %

Note: The old_pophost_iffirst and old_pophost_makeuser have now been replaced by the more consistent old_pophost_createuser_disable setting.

Syntax: old_pophost_sep string

old_smtphost - Old smtp host

SMTP host to check for existing users (when creating new accounts).

Syntax: old_smtphost string

old_smtphost_skip - Skip old_smtphost checks for administrators

Who to skip old_smtphost checks for. Valid values are "admin" and "domadmin".

Syntax: old_smtphost_skip string

old_xfile - Migration - Copy xfile data across

Only valid if the old server is also running surgemail. And requires old_pophost settings to work

Syntax: old_xfile bool

pop_min_time - Min seconds between pop logins (see warning)

This setting confuses some clients, and results in the user having to login again. The error is not always shown to the end user by some dumb email clients

Syntax: pop_min_time int

pop_welcome - Welcome message for POP/IMAP

This is the string displayed to the user when they connect to this domain before they login. The same string is also used in IMAP response. See also smtp_welcome. 

Syntax: pop_welcome string

prefix - Prefix for usernames in database

This prefix is used in the user database to distinguish these virtual domain users. This setting is for backward compatibility and not generally recommended. It is better to store user@domain.name in the userdatabase rather than just 'username'. 

Syntax: prefix string

proxy_pop_nodomain - Strip domain when talking to proxy POP host

This setting causes the domain name to be stripped from user login names when talking to the proxy POP host. This does not apply to surgewall, see surgewall_options for details

Syntax: proxy_pop_nodomain bool

quota_default - Default Email quota for users

This setting allows you to limit disk usage of each user a setting of 10mb is typical. The main reason for this setting is to stop a single user who is being mail bombed using up all your disk space. So even if you don't want to limit disk use you should still set some limit eg:100,000,000 (100mb) 

Syntax: quota_default string

quota_domain - Total quota for the domain, e.g. 300mb, 2gig

Limits the total usage (used quota) for the entire domain. Note that the command tellmail quota_rebuild_domain domain.name may be used to reset these figures.

Syntax: quota_domain string

See also: quota_default, user_sms_quota, user_list_quota, webdav_quota, g_log_quota, g_quota_warning_disable, g_quota_noemail, g_quota_notrash, g_quota_rcpt_disable, g_quota_try_later, g_quota_friends, g_quota_before_forward, g_quota_skip, g_quota, g_quota_disable, g_quota_report, g_quota_550, g_share_quota, g_user_sms_quota, g_user_list_quota

rcpt_msg - Response given for invalid recipient errors, message is prefixed by email address.

This setting has no further documentation currently available

Syntax: rcpt_msg string

See also: g_rcpt_max, g_rcpt_max_in, g_rcpt_msg, g_rcpt_bang, g_rcpt_colon, g_rcpt_quote, g_rcpt_nodup, g_rcpt_trace, g_rcpt_ok, g_from_ok, g_smtp_bounce_nslow, g_smtp_cmd_timeout, g_smtp_data_timeout

redirect - Redirect Email to another account

This redirects mail from one user to another. The destination can be a full Email address with another domain name. 

Syntax: redirect was=string to=string

redirect_cc - CC & Redirect Email to another account

This carbon copy redirects a message so the original user receives it as well as the new user you have specified. This is good for keeping a record of incoming emails for a particular account. 

Syntax: redirect_cc was=string to=string

redirect_hash - Share incoming message evenly between several accounts

The sharing is done based on a hash of the 'from' address so that the same 'from' address will always go to the same recipient

Syntax: redirect_hash was=string to=string

redirect_max - Limits the number of redirect rules

This setting applies a limit to the number of redirect rules which are allowed in this domain (only applies to domain admins)

Syntax: redirect_max int

security_suffix - Suffix for smtp/imap/pop login

This setting stops the username matching the email address by requiring a different suffix for logging in, so user@xyz.mail.server instead of user@mail.server. This is like an alias for the domain that only works for logging in.

Syntax: security_suffix string

See also: disable_smtp_after, old_smtphost, old_smtphost_skip, smtp_auth_off, smtp_welcome, smtp_welcome_name, smtp_from_ip, surgeweb_backend_smtp, surgeplus_smtp_server_name, g_disable_smtp_after, g_dbabble_smtp_port, g_dbabble_smtp_prefix, g_deny_smtp, g_safe_smtp, g_safe_smtp_email, g_manager_smtp, g_migrate_onsmtp, g_smtp_allow_invalid, g_smtp_auth_debug, g_smtp_bounce_nslow, g_smtp_cmd_timeout, g_smtp_data_timeout, g_smtp_delay_stamp, g_smtp_welcome_delay, g_smtp_log_protocol, g_smtp_log_size, g_smtp_max, g_smtp_warning, g_smtp_max_reason, g_smtp_max_nolimit, g_smtp_maxbad, g_smtp_port, g_smtp_portauth, g_smtp_portforce, g_smtp_secure_port, g_smtp_vrfy_msg, g_smtp_vrfy_allow, g_smtp_etrn_auth, g_smtp_help_disable, g_smtp_plain_hide, g_smtp_cram_enable, g_smtp_no_brackets, g_smtp_big, g_smtp_fast_bounce, g_smtp_fix_nohead, g_smtp_thread, g_smtp_auth_off, g_smtp_auth_ip, g_smtp_noauth, g_smtp_noauthm, g_smtp_noauth_msg, g_verify_smtp, g_surgeplus_smtp_server_name

send_helo - Mail host A Record name used when sending helo to other servers - requires g_send_helo_from true

This is only used if g_send_helo_from is also true

Syntax: send_helo string

sent_store - Store users message in named folder automatically, e.g. Sent

This setting has no further documentation currently available

Syntax: sent_store string

smtp_auth_off - Disable SMTP AUTH from unknown ip addresses

This prevents a hacker sending out spam by cracking a users account details, users must login from an address specified in g_smtp_auth_ip or g_relay_allow_ip

Syntax: smtp_auth_off bool

See also: disable_smtp_after, old_smtphost, old_smtphost_skip, smtp_welcome, smtp_welcome_name, smtp_from_ip, surgeweb_backend_smtp, surgeplus_smtp_server_name, g_disable_smtp_after, g_dbabble_smtp_port, g_dbabble_smtp_prefix, g_deny_smtp, g_safe_smtp, g_safe_smtp_email, g_manager_smtp, g_migrate_onsmtp, g_smtp_allow_invalid, g_smtp_auth_debug, g_smtp_bounce_nslow, g_smtp_cmd_timeout, g_smtp_data_timeout, g_smtp_delay_stamp, g_smtp_welcome_delay, g_smtp_log_protocol, g_smtp_log_size, g_smtp_max, g_smtp_warning, g_smtp_max_reason, g_smtp_max_nolimit, g_smtp_maxbad, g_smtp_port, g_smtp_portauth, g_smtp_portforce, g_smtp_secure_port, g_smtp_vrfy_msg, g_smtp_vrfy_allow, g_smtp_etrn_auth, g_smtp_help_disable, g_smtp_plain_hide, g_smtp_cram_enable, g_smtp_no_brackets, g_smtp_big, g_smtp_fast_bounce, g_smtp_fix_nohead, g_smtp_thread, g_smtp_auth_off, g_smtp_auth_ip, g_smtp_noauth, g_smtp_noauthm, g_smtp_noauth_msg, g_verify_smtp, g_surgeplus_smtp_server_name

smtp_from_ip - Require incoming email from matching ip

This is used to ensure all incoming email comes direct from a filter system and not from the internet, only authenticated email will bypass this (and g_spam_allow)

Syntax: smtp_from_ip string

smtp_welcome - Welcome message for SMTP

This is the string displayed to the user when they connect to this domain, before they login. See also pop_welcome 

Syntax: smtp_welcome string

smtp_welcome_name - SMTP welcome connection hostname

This setting has no further documentation currently available

Syntax: smtp_welcome_name string

spam_block - Default for this domain to block spf etc failures

This setting sets the default behavior for this domain, if g_spam_block is not set, then this setting can turn on blocking as the default for this entire domain. Individual users can still set their own settings to block or not block for spf.

Syntax: spam_block bool

See also: g_friends_allow_spf, g_friends_spf_fail_bounce, g_friends_check_spf, g_friends_obey_spf, g_received_skip_spf, g_spf_mode, g_spf_nocache, g_spf_rewrite, g_spf_rewrite_relay, g_spf_rewrite_gateway, g_spf_norewrite, g_spf_dns_timeout, g_spf_timeout, g_spf_domain, g_spf_user_domain, g_spf_very_strict, g_spf_debug_log, g_spf_default, g_spf_default_noblock, g_spf_skip, g_spf_skip_from, g_spf_skip_to, g_spf_rev_skip, g_spf_share, g_spf_header, g_spf_baddns_skip, g_spf_nogrey, g_spf_noallow, g_spf_nofriend, g_spf_enforce, g_spf_enforce_real, g_spf_enforce_auto, g_spf_required, g_spf_enforce_local, g_spflog_enable, g_spflog_domains, g_spf_byemail, g_spf_web_url

spam_noblock - Disable spf blocking for this domain

This is the opposite of spam_block, this can be used if g_spam_block is true and you wish to disable spf blocking for one domain.

Syntax: spam_noblock bool

See also: g_friends_allow_spf, g_friends_spf_fail_bounce, g_friends_check_spf, g_friends_obey_spf, g_received_skip_spf, g_spf_mode, g_spf_nocache, g_spf_rewrite, g_spf_rewrite_relay, g_spf_rewrite_gateway, g_spf_norewrite, g_spf_dns_timeout, g_spf_timeout, g_spf_domain, g_spf_user_domain, g_spf_very_strict, g_spf_debug_log, g_spf_default, g_spf_default_noblock, g_spf_skip, g_spf_skip_from, g_spf_skip_to, g_spf_rev_skip, g_spf_share, g_spf_header, g_spf_baddns_skip, g_spf_nogrey, g_spf_noallow, g_spf_nofriend, g_spf_enforce, g_spf_enforce_real, g_spf_enforce_auto, g_spf_required, g_spf_enforce_local, g_spflog_enable, g_spflog_domains, g_spf_byemail, g_spf_web_url

spam_strip - Strip spam headers for this domain

Strip spamdetect headers for this domain. 

Syntax: spam_strip bool

ssl_allow - IP Wild card list to allow SSL encryption from

This setting remove the capability so clients won't attempt ssl, it is only really functional for ip based virtual domains

Syntax: ssl_allow string

ssl_hsts - Send HSTS header to prevent accidental http access for this domain, also rejects self signed certificates

This setting has no further documentation currently available

Syntax: ssl_hsts bool

See also: ssl_pop_domain, ssl_allow, ssl_require_login, ssl_require_web, g_encrypt_ssl_force, g_encrypt_ssl_noforce, g_mirror_nossl, g_ssl_allow, g_ssl_allow_imap, g_ssl_allow_fix, g_ssl_disable, g_ssl_disable_web, g_ssl_disable_port25, g_ssl_disable_des, g_ssl_test_fail, g_ssl_require, g_ssl_require_in, g_ssl_require_imap, g_ssl_require_login, g_ssl_require_out, g_ssl_require_web, g_ssl_retry_seconds, g_ssl_try_out, g_ssl_try_not, g_ssl_try_from, g_ssl_per_domain, g_ssl_ciphers, g_ssl_ciphers_web, g_ssl_ciphers_add, g_ssl_disable_tlsv1, g_ssl_disable_tlsv1_1, g_ssl_disable_tlsv1_2, g_ssl_disable_sslv2, g_ssl_disable_sslv3, g_ssl_sha1_sign, g_ssl_throttle_renegotiation, g_ssl_honor, g_ssl_perfect, g_ssl_fips

ssl_pop_domain - Domain to use for ssl certificates for POP and IMAP

If you have multiple aliases for this domain then this setting lets you choose which one to use for the SSL certificate

Syntax: ssl_pop_domain string

See also: ssl_allow, ssl_require_login, ssl_require_web, ssl_hsts, g_encrypt_ssl_force, g_encrypt_ssl_noforce, g_mirror_nossl, g_ssl_allow, g_ssl_allow_imap, g_ssl_allow_fix, g_ssl_disable, g_ssl_disable_web, g_ssl_disable_port25, g_ssl_disable_des, g_ssl_test_fail, g_ssl_require, g_ssl_require_in, g_ssl_require_imap, g_ssl_require_login, g_ssl_require_out, g_ssl_require_web, g_ssl_retry_seconds, g_ssl_try_out, g_ssl_try_not, g_ssl_try_from, g_ssl_per_domain, g_ssl_ciphers, g_ssl_ciphers_web, g_ssl_ciphers_add, g_ssl_disable_tlsv1, g_ssl_disable_tlsv1_1, g_ssl_disable_tlsv1_2, g_ssl_disable_sslv2, g_ssl_disable_sslv3, g_ssl_sha1_sign, g_ssl_throttle_renegotiation, g_ssl_honor, g_ssl_perfect, g_ssl_fips

ssl_require_login - Require ssl for this domain

This setting has no further documentation currently available

Syntax: ssl_require_login string

ssl_require_web - Require https for most web features (excluding blogs file sharing and surgeplus)

This setting has no further documentation currently available

Syntax: ssl_require_web bool

See also: ssl_pop_domain, ssl_allow, ssl_require_login, ssl_hsts, g_encrypt_ssl_force, g_encrypt_ssl_noforce, g_mirror_nossl, g_ssl_allow, g_ssl_allow_imap, g_ssl_allow_fix, g_ssl_disable, g_ssl_disable_web, g_ssl_disable_port25, g_ssl_disable_des, g_ssl_test_fail, g_ssl_require, g_ssl_require_in, g_ssl_require_imap, g_ssl_require_login, g_ssl_require_out, g_ssl_require_web, g_ssl_retry_seconds, g_ssl_try_out, g_ssl_try_not, g_ssl_try_from, g_ssl_per_domain, g_ssl_ciphers, g_ssl_ciphers_web, g_ssl_ciphers_add, g_ssl_disable_tlsv1, g_ssl_disable_tlsv1_1, g_ssl_disable_tlsv1_2, g_ssl_disable_sslv2, g_ssl_disable_sslv3, g_ssl_sha1_sign, g_ssl_throttle_renegotiation, g_ssl_honor, g_ssl_perfect, g_ssl_fips

status_url - Specify full url for status message e.g. http://domain.name:port domain specific setting

This setting has no further documentation currently available

Syntax: status_url string

surgeplus_pop_server_name - Default POP server for SurgePlus clients

New installs of the SurgePlus client will be automatically configured to use this specified POP server. If you don't specify a value for this setting, then the POP server will default to what you have specified by the url_host setting, or the domain name if you don't specify a url_host setting. You will need to do a 'tellmail surgeplus rebuild' command after changing this setting and if you are downloading the new build via your web browser be aware that web browsers sometimes cache the old download.

Syntax: surgeplus_pop_server_name string

Example: pop.your.domain.name

See also: url_host, disable_surgeplus, surgeplus_smtp_server_name, g_url_host_noscan, g_surgeplus_smtp_server_name

surgeplus_smtp_server_name - Default SMTP server for SurgePlus clients

New installs of the SurgePlus client will be automatically configured to use this specified SMTP server. If you don't specify a value for this setting, then the POP server will default to what you have specified by the url_host setting, or the domain name if you don't specify a url_host setting. You will need to do a 'tellmail surgeplus rebuild' command after changing this setting and if you are downloading the new build via your web browser be aware that web browsers sometimes cache the old download.

Syntax: surgeplus_smtp_server_name string

Example: pop.your.domain.name

See also: url_host, disable_surgeplus, surgeplus_pop_server_name, g_url_host_noscan, g_surgeplus_pop_server_name

SurgeWall - Surgewall mailproxy feature (Version 1.4a or greater required)

This allows SurgeMail to be placed as a "filter" in front of an existing mailserver to apply friends rules, spam filtering and/or virus scanning. All you need to do is set this to the existing server address. POP3 will be routed through to the existing server and users can login to the SurgeMail web interface to configure their friends, spam and virus options eg:

surgewall "1.2.3.4"

This setting should be an IP address not an IP and port. Use surgewall_options if you need to specify non-standard ports or a different IP for POP, SMTP and/or IMAP. You may specify a comma seperated list of IP addresses. SurgeWall will connect to each in turn until it gets a successful login. To modify this behaviour see the proxy_failover option of the surgewall_options setting.

See here for more details.

Syntax: surgewall string

surgewall_auth - SurgeWall SMTP authentication

Defines the username and password to use for SMTP authentication when sending to SurgeWall'ed server.

Syntax: surgewall_auth user=string pass=string

surgewall_capa_local - Just return local imap capa response rather than remote

Note that it can only guess the right imap host if you are using ip based virtual domains.

Syntax: surgewall_capa_local bool

surgewall_local_too - For web domain admin try local database too

Allows local user accounts to be created for domain admin

Syntax: surgewall_local_too bool

surgewall_options - SurgeWall miscellaneous options (Version 1.4c or greater required)

This setting controls the SurgeWall miscellaneous configuration options it has several parameters:

strip_domain TRUE/FALSE strips the domain name from the username when sending to the original server.
proxy_failover TRUE/FALSE failover mode for several addresses, only use next address if previous one fails to respond.
auth_local TRUE/FALSE requires that users exist locally, no authentication is done via the original server.
pop Comma seperated list of IP addresses and port of the original POP3 server.
imap Comma seperated list of IP addresses and port of the original IMAP server.
smtp Comma seperated list of IP addresses and port of the original SMTP server.
usercgi pop/imap which protocol to use when authenticating logins to the web interface.

The POP, SMTP and IMAP options allow you to configure SurgeWall to connect to different IPs and/or ports for each interface that it proxies. So for example you can run SurgeWall on the same machine as the old mail server provided the old mail server is configured to run on non-standard ports. eg:

surgewall_options strip_domain="TRUE" pop="127.0.0.1:111" smtp="127.0.0.1:26" imap="127.0.0.1:144"

or perhaps you have the pop, smtp and imap components of the server running on several machines, eg.

surgewall_options strip_domain="TRUE" pop="1.2.3.4:111" smtp="2.3.4.5:26" imap="3.4.5.6:144"

You may specify several different IPs in a comma seperated list in the POP, SMTP and IMAP options if you do this SurgeWall will connect to each in turn until it gets a successful login. The same is true for the SurgeWall setting.

To modify this behaviour you can set proxy_failover to TRUE this causes SurgeWall to only use the next address if it fails to connect to the preceeding address, meaning it will use each server specified only if the previous server is not responding.

Syntax: surgewall_options strip_domain=bool proxy_failover=bool auth_local=bool pop=string smtp=string imap=string usercgi=string

surgewall_saveusers - Save users in the local database as they login

This can be used with auth_local=true option to create the local accounts...

Syntax: surgewall_saveusers bool

surgeweb_backend_server - Backend server to connect to

This specifies the backend machine where Surgeweb connects for email and to store user settings. Surgeweb will cache data here but store the master copy of anything on the backend machine.

Syntax: surgeweb_backend_server string

surgeweb_backend_smtp - Backend smtp access (if non default)

per default connects to 127.0.0.1:25

Syntax: surgeweb_backend_smtp string

surgeweb_backend_web - Backend web access - for usercgi /surgeplus (if non default)

If no backendserver specified is '/', default with backend is 'http://backend_server/'. For non default port / machine specify say: 'server.name:7080'

Syntax: surgeweb_backend_web string

surgeweb_custom - Surgeweb customisation level

This setting has no further documentation currently available

Syntax: surgeweb_custom string

suspend - Disable logins for entire domain

Use this where a domain is not being paid for and you want to suspend all users in the domain. This prevents users checking mail NOT users sending mail or other domains sending to this domain

Syntax: suspend bool

suspend_incoming - Disable delivery and give 450 retry message

Useful to temporarily disable a domain while moving it

Syntax: suspend_incoming bool

url_alias - Allows translation from one URL to another

Allows translation from one URL or beginning of a URL to another. eg:

url_alias from="/cgi-bin/" to="/scripts/"

will cause the URL http://localhost:7025/cgi-bin/fred.cgi to reference the same file as http://localhost:7025/scripts/fred.cgi would have, the fred.cgi in the SurgeMail 'scripts' directory. These settings are checked before the g_url_alias settings, the first matching rule is used, settings are checked in the order specified.

Syntax: url_alias from=string to=string ports=string

url_blogs - BLOGS host A Record name (if different from MX Record name - eg. blogs.mydomain.com)

This is used when generating the 'view' link, if you don't specify a port (:nnn) then it will use the first webmail port by default, by default the url_host setting will be used, failing that the domain name is used

Syntax: url_blogs string

url_host - Mail host A Record name (if different from MX Record name)

This name is used in URLs to this domain. It is important that the hostname specified here will resolve to this physical host running SurgeMail at all times.

It is used by WebMail in the email sent to user upon signup. The email sent to the manager when a user signs up and is the host passed to WebMail when auto-logging a user in. If your auto-logins are failing because of a "cannot connect error" then you may need to set this to the correct host.

Syntax: url_host string

user_access_default - Default user features granted to users in this domain

This setting allows you to specify default access to certain SurgeMail features. It is specified in the same maner as the g_user_access settings 'access' parameter. eg:

user_access_default "all,!spam,!virus"

Syntax: user_access_default string

user_alias - Number of aliases accounts can create

This setting specifies the maximum number of account aliases an account in this domain is allowed to create. The format of these aliases is specified in the file specified by the g_user_alias_file setting.

Default is disabled (0) which disables the alias creation interface in the user.cgi pages.

Syntax: user_alias int

user_auto - Auto create users when a login attempt occurs

Exceedingly dangerous setting only intended for closed systems not open to internet! Accounts are created when someone tries to login via imap/pop etc... If the account already exists it is not modified unless it is currently set with the password defined in user_auto_pass (broadsoft feature)

Syntax: user_auto bool

user_auto_always - Auto create users when a login attempt occurs and always accept any password

Exceedingly dangerous setting only intended for closed systems not open to internet! Account is created and then allowed to login with any password (used in closed broadsoft setup)

Syntax: user_auto_always bool

user_auto_pass - Auto create users with this password on message delivery

Exceedingly dangerous setting only intended for closed systems not open to internet! Accounts are created on message delivery if they don't exist with the specified password. Broadsoft Extentsion account autoprovisioning (Broadsoft feature)

Syntax: user_auto_pass string

user_centipaid - see CentiPaid.htm

Specifies the various CentiPaid options a user is allowed to configure for themselves.

Syntax: user_centipaid string

user_hide_security - Hide security logs from users

This setting has no further documentation currently available

Syntax: user_hide_security bool

user_list_quota - Number of mailing lists users can create

This setting configures the number of mailing lists a user of this domain can create. See also g_user_list_quota which can set quota globally or by user group. Also the list_quota authent field can set quota per user.

Syntax: user_list_quota int

user_max - Maximum user allowed in this domain

This setting specifies the maximum number of users in this domain. Domain admins and users are blocked from adding more users than specified in this setting. The admin can still add users.

Syntax: user_max int

user_send_max - Maximum number of emails per day (requires SMTP AUTH)

This setting specifies the maximum number of messages an account in this domain is allowed to send in a day.

Syntax: user_send_max int

user_sms - Enable users to setup SMS notifications

This setting allows users to setup an SMS notification of email whose subject matches the user defined keyword.

Syntax: user_sms bool

user_sms_quota - Number of sms messages per account

This setting allows you to configure either a quota or a 'number of credits' system for SMS messages. This setting has 2 parameters 'initial' and 'period'.

If you set 'period' to 0 then 'initial' is the number of credits a user will begin with they are decremented when they send an SMS and not increased unless you increase them manually.

If you set 'period' to any value other than 0, then 'initial' is the users quota, which is re-set after the time period specified by 'period'. Valid 'period' values are a number of hours, or suffix the value with d, w or y to indicate a number of days, weeks or years respectively, eg: 5w equals 5 weeks.

Syntax: user_sms_quota initial=int period=string

user_status_send - How often to send user status messages (0 = never)

When the user enables friends then this setting will send them a regular report on what is pending and what filter rules have done. Files status_html.eml

Syntax: user_status_send int

See also: friends_at_rcpt, friends_pending_name, friends_url, g_friends_only, g_friends_bounce_rej, g_friends_bounce_friend, g_friends_cleanup, g_friends_daemon_ok, g_friends_name, g_friends_pending_name, g_friends_silent, g_friends_silent_level, g_friends_ignore, g_friends_skip_ip, g_friends_confirm_subject, g_friends_default_mode, g_friends_default_autoadd, g_friends_msg, g_friends_msg_link, g_friends_latest_headers, g_friends_lang_auto, g_friends_pending_keep, g_friends_pending_max, g_friends_pending_vanish, g_friends_at_rcpt, g_friends_allow_spf, g_friends_spf_fail_bounce, g_friends_check_spf, g_friends_safer, g_friends_always, g_friends_add_trusted, g_friends_global_add, g_friends_global_exclude, g_friends_confirm_debug, g_friends_rotate, g_friends_long, g_friends_ignore_trusted, g_friends_url, g_friends_autodom, g_friends_byemail, g_friends_bounce_second, g_friends_old_status_email, g_friends_obey_spf, g_friends_local_match, g_friends_spam_score, g_friends_status_sort, g_friends_release_wash, g_friends_warnonce, g_friends_debug1, g_imap_friends, g_quota_friends, g_spam_probe_friends, g_user_friends_domain_log_disable, g_user_friends_log_disable

web_access_ip - Restrict access to web ports based on ip

Specifies a list of ports and a wildcard list of valid ip addresses who can connect to those ports.

Syntax: web_access_ip ports=string ip=string

web_path - Path to web admin pages

Path to web admin and user self management pages. This setting allows you to give each domain a different set of pages and thus a different look and feel. To enable this, copy the entire 'web' directory then set web_path to the path of the copied files. Lastly modify the copied files to have the new look and feel you desire.

Syntax: web_path string

web_url_path - Url to path translation with access specifier

This lets you set up aliases and translations of urls partly based on the access rights of the user.

Syntax: web_url_path url=string path=string access=string

See also: webmail_url, webmail_urladd, webmail_workarea, webmail_host, g_keepalive, g_key_manual, g_key_nowarning, g_known_skip, g_web_policy_disable, g_web_php_exe, g_web_trust_ip, g_web_forwarded_test, g_webdav_enable, g_webdav_group, g_webdav_public, g_webdav_path, g_webmail_limit, g_webmail_port, g_webmail_save, g_webmail_secure_port, g_webmail_timeout, g_webmail_useip, g_webmail_popmode, g_webmail_url, g_webmail_urladd, g_webmail_workarea, g_webmail_select_domain, g_webmail_secret, g_web_hide_source_names, g_web_force_doctype_first_disable, g_web_url_path, g_web_title, g_web_utf8

webdav_quota - Webdav quota per user in this domain, e.g. 100mb

Limits the webdav storage area for this user, default is the users email quota

Syntax: webdav_quota string

webmail_host - The IP address of the mail server

SurgeMail sets the imaphost/smtphost address in surgehost.ini for WebMail. First it checks for a virtual domain ip, then it checks for a specifically bound ip address in the imap/smtp port settings, if neither are specified it defaults to 127.0.0.1. The webmail_host will override this process and assign a value directly. You require this when using a Smart Router or Load Balancer, please read this.

Syntax: webmail_host string

See also: webmail_url, webmail_urladd, webmail_workarea, web_url_path, g_keepalive, g_key_manual, g_key_nowarning, g_known_skip, g_web_policy_disable, g_web_php_exe, g_web_trust_ip, g_web_forwarded_test, g_webdav_enable, g_webdav_group, g_webdav_public, g_webdav_path, g_webmail_limit, g_webmail_port, g_webmail_save, g_webmail_secure_port, g_webmail_timeout, g_webmail_useip, g_webmail_popmode, g_webmail_url, g_webmail_urladd, g_webmail_workarea, g_webmail_select_domain, g_webmail_secret, g_web_hide_source_names, g_web_force_doctype_first_disable, g_web_url_path, g_web_title, g_web_utf8

webmail_url - Url to the WebMail cgi

If WebMail is not in the default place and/or is not on the SurgeMail machine then this setting tells SurgeMail where it is so links to WebMail from SurgeMail function correctly.

Syntax: webmail_url string

See also: webmail_urladd, webmail_workarea, webmail_host, web_url_path, g_keepalive, g_key_manual, g_key_nowarning, g_known_skip, g_web_policy_disable, g_web_php_exe, g_web_trust_ip, g_web_forwarded_test, g_webdav_enable, g_webdav_group, g_webdav_public, g_webdav_path, g_webmail_limit, g_webmail_port, g_webmail_save, g_webmail_secure_port, g_webmail_timeout, g_webmail_useip, g_webmail_popmode, g_webmail_url, g_webmail_urladd, g_webmail_workarea, g_webmail_select_domain, g_webmail_secret, g_web_hide_source_names, g_web_force_doctype_first_disable, g_web_url_path, g_web_title, g_web_utf8

webmail_urladd - Url data to append to WebMail auto-login link

This setting allows you to specify additional information and settings which are passed to WebMail when SurgeMail links to it. Example: Different colors to use for this domain.

Syntax: webmail_urladd string

See also: webmail_url, webmail_workarea, webmail_host, web_url_path, g_keepalive, g_key_manual, g_key_nowarning, g_known_skip, g_web_policy_disable, g_web_php_exe, g_web_trust_ip, g_web_forwarded_test, g_webdav_enable, g_webdav_group, g_webdav_public, g_webdav_path, g_webmail_limit, g_webmail_port, g_webmail_save, g_webmail_secure_port, g_webmail_timeout, g_webmail_useip, g_webmail_popmode, g_webmail_url, g_webmail_urladd, g_webmail_workarea, g_webmail_select_domain, g_webmail_secret, g_web_hide_source_names, g_web_force_doctype_first_disable, g_web_url_path, g_web_title, g_web_utf8

webmail_workarea - Path to WebMail workarea

If WebMail is not installed in the default location on this SurgeMail machine this setting tells SurgeMail where to find it.

Syntax: webmail_workarea string

See also: webmail_url, webmail_urladd, webmail_host, web_url_path, g_keepalive, g_key_manual, g_key_nowarning, g_known_skip, g_web_policy_disable, g_web_php_exe, g_web_trust_ip, g_web_forwarded_test, g_webdav_enable, g_webdav_group, g_webdav_public, g_webdav_path, g_webmail_limit, g_webmail_port, g_webmail_save, g_webmail_secure_port, g_webmail_timeout, g_webmail_useip, g_webmail_popmode, g_webmail_url, g_webmail_urladd, g_webmail_workarea, g_webmail_select_domain, g_webmail_secret, g_web_hide_source_names, g_web_force_doctype_first_disable, g_web_url_path, g_web_title, g_web_utf8

xfile_url - Url to xfile files (see surgeplus utility)

Use to override the url that users are told they can access their shared SurgePlus files at via a web browser. The default location is on the port specified by the webmail_port setting.

Syntax: xfile_url string

Example: https://your.domain.name:7443

See also: old_xfile, g_webmail_port, g_xfile_allow, g_surgeplus_web_port, g_surgeplus_web_url